Cube recomendation

Discussion about methods, times, and all things related to solving the Rubik's brand products.

Cube recomendation

Postby chrisrocks » Mon Dec 28, 2009 3:24 am

I highly recommend the D.I.Y. cubes sold here on the rubik's website. Once you have everything adjusted the way you like it and lubricate the cube it performs very well and smooth. So for those of you who are looking for a speedcube, i would recommend the DIY highly.
chrisrocks
 
Posts: 71
Joined: Thu Dec 18, 2008 6:03 am

Re: Cube recomendation

Postby Crazy_Cuber » Mon Dec 28, 2009 6:17 am

that is right i have the white & black diy an they're awesome!
Crazy_Cuber
 
Posts: 50
Joined: Mon Dec 21, 2009 9:21 am

Re: Cube recomendation

Postby corndawg » Tue Jan 05, 2010 1:07 pm

cube4you DIY's are good too its my fav cube so far
corndawg
 
Posts: 58
Joined: Fri May 16, 2008 1:32 pm

Re: Cube recomendation

Postby rubixcuber » Mon Jan 11, 2010 4:29 am

[quote user='chrisrocks']I highly recommend the D.I.Y. cubes sold here on the rubik's website. Once you have everything adjusted the way you like it and lubricate the cube it performs very well and smooth. So for those of you who are looking for a speedcube, i would recommend the DIY highly.[/quote]


careful, these cubes pop far more than any other DIYs  'IF' (READ THE IF) the cube's tension is not balanced or perfect or good.


if cube.tension.balanced = True {


   Cube.Perfection('AWESOME')


}


Else {


   SUCK CRACKLE POP


}

rubixcuber
 
Posts: 701
Joined: Sun Nov 09, 2008 3:06 pm

Re: Cube recomendation

Postby chrisrocks » Mon Jan 11, 2010 10:44 am

true true
chrisrocks
 
Posts: 71
Joined: Thu Dec 18, 2008 6:03 am

Re: Cube recomendation

Postby PudgyPachyderm » Tue Feb 02, 2010 2:08 am

I just bought one of these cubes and right now it feels quite a bit different from my store-bought cube.  Are there any tips/guidelines to adjusting the tension on the DIY Cubes?  If feel like the faces are way too flexible and loose, however they really don't spin all that freely at the moment.  I haven't lubed it yet with the supplied silicon lube, so that may help as well.  Just wondering if there's any suggestions on adjusting tension for the cube, thanks.
PudgyPachyderm
 
Posts: 2
Joined: Sat Jan 23, 2010 3:46 pm

Re: Cube recomendation

Postby Crazy_Cuber » Tue Feb 02, 2010 9:36 am

DIY FROM C4U R THE BEST DUDES lol


 

Crazy_Cuber
 
Posts: 50
Joined: Mon Dec 21, 2009 9:21 am


Return to Speedcubing

Who is online

Users browsing this forum: No registered users and 2 guests