cube lube

Older threads and posts

cube lube

Postby fundash26 » Sun Mar 16, 2008 6:34 am

hi everyone!

i am using CRC 808 silicone spray but, i want my cube the be like a DIY (Do It Yourself) cube, any suggestions?[:S]
fundash26
 
Posts: 7
Joined: Thu Mar 13, 2008 10:35 am

Re: cube lube

Postby p.j._1313 » Sun Mar 16, 2008 11:31 am

the sillicone may help alot but i found another way that helps a lot too on the newer cubes (the ones that already made). i sand off the arch under the center piece to where it is almost rounded but there's still an arch. it helps a lot in cutting corners. if your cube is just tight try takingit apart and putting something as a wedge between the centerpiece and the main center mechanism thing (kernel i think). i normally use little folded sheets of paper and leave them in overnight. this helps th spring tension a little. hope his helps

p.j._1313
 
Posts: 29
Joined: Sat Mar 15, 2008 4:23 pm


Return to Rubik's Forum Archive

Who is online

Users browsing this forum: No registered users and 2 guests